No products were found matching your selection.
Other Related Products
-


- Thickness: 500um / 0.5mm nominal
- Material: PET / polyester film
- Format: roll, slit roll, or cut sheet
- Color: clear to semi-clear
- Surface: smooth, rigid, flat
- Main use: insulation gasket, spacer, backing sheet
-


- Material: PE film
- Adhesive: acrylic-based, low to medium tack
- Thickness: 30 / 40 / 50 / 70 microns
- Color: clear, blue, or custom
- Width: standard and slit-to-order rolls
- Use: temporary indoor or outdoor glass protection
-


- Material:UV stabilized PET / BOPET
- Color:Clear, translucent, white, or light tint
- Thickness:25um-250um, custom range available
- Width:Slit roll or jumbo roll format
- Surface:Corona treated, coated, or primer-ready side
- Use:Outdoor labels, overlamination, PV laminate support, weatherable composites
-


- Material: PE film
- Adhesive: Light tack / medium tack
- Color: Clear or printed
- Format: Roll, perforated roll, or die-cut sheet
- Use: Vehicle interior carpet
- Protection: Short-term service and delivery use
-


- Material: Premium PET polyester film with a pressure-sensitive adhesive.
- Thickness: Available in sizes ranging from 25 μm to 200 μm.
- Finish: Clear, matte, and metallic options available.
- Adhesive Type: Permanent, removable, or custom options.
- Dimensions: Supplied in rolls or sheets, with custom sizing available.
- Durability: High tensile strength, scratch resistance, and UV stability.
-


- Material: PET film or PVC film
- Finish: Clear, marble, stone, wood, matte
- Width: 30 cm, 40 cm, 60 cm, 122 cm
- Length: 2 m, 5 m, 10 m, 50 m
- Adhesive: Acrylic pressure-sensitive adhesive
- Use Method: Peel, align, smooth, and trim
-


- Structure: PA/PE or PA/EVOH/PE
- Thickness: 50–300 μm
- Color: clear, white, blue, or tinted
- Forming type: shallow draw or deep draw
- Pack format: vacuum or MAP
- Supply form: roll stock for thermoforming lines
-


- Common widths: 24″, 36″, and 48″
- Common roll lengths: 200′, 250′, and 500′
- Film material: polyethylene protective film
- Adhesive type: water-based acrylic adhesive
- Typical thickness options: 2.1 mil and 3.0 mil
- Recommended use: tile, marble, vinyl, laminate, and factory-finished hardwood floors
-


- Material: PET / BOPET film with industrial color coating
- Thickness: 25um-250um
- Color: White, black, red, blue, yellow, green, silver, gold, or approved shade
- Finish: Gloss, matte, satin, or semi-matte
- Format: Master roll, slit roll, sheet, or converted size
- Use: Labels, printed panels, insulation ID, laminated surface layers