Protective Film Factory is a clear polyester film manufacturer supplying transparent PET base films and converted materials for industrial use. The range includes master rolls, slit rolls, cut sheets, adhesive-backed PET and die-cut parts. Each format is prepared to match the converting line, handling method and finished component. Grades are selected according to clarity, haze, flatness, dimensional stability and heat exposure during downstream processing.
Showing all 5 results
Clear polyester film is used when a project needs a stable, transparent PET substrate for further processing. Some applications only require a standard-clear roll. Others need higher clarity because the material remains visible in an overlay, window or graphic component.
As a clear polyester film manufacturer, Protective Film Factory prepares roll, sheet and converted formats for different production routes. For volume runs, the specification should record thickness, roll width, roll length, core size, outer diameter and winding direction. If heat is involved, dimensional stability should be checked under the planned processing temperature and dwell time. Sheet-based work also needs a flatness review before cutting or assembly.
The category covers standard clear PET rolls, high-clarity grades, custom slit rolls, cut-to-size sheets and converted PET components. Ultra clear polyester film suits visual parts where appearance consistency and low haze matter more than general-purpose transparency.
A pet film plastic sheet can be prepared for insulation pieces, graphic processing, spacers and offline die cutting. Sheet specifications should identify dimensions, surface condition, flatness and edge quality. For bonding and assembly, self adhesive clear polyester film can be supplied as rolls, sheets or shaped parts.
Choose rolls for continuous printing, rewinding, laminating or automated converting. Choose sheets for fixed dimensions, manual placement, inspection or die cutting. A sheet specification should state length, width, thickness, flatness, squareness and cutting tolerance.
Thickness alone is not enough. A roll can unwind poorly if the core size, outer diameter or winding direction does not match the machine. A sheet can create fit or registration problems when curl, squareness or edge condition is ignored. Test adhesive-backed grades on the actual bonding surface before volume converting. For repeat orders, keep the approved sample and record the roll build, sheet appearance and batch reference.
For slit rolls, review width tolerance, core size, outer diameter, winding direction, slit-edge consistency and unwind stability. For sheets, check dimensions, squareness, flatness and cutting tolerance. If heating is part of the process, run the selected film at the planned temperature and dwell time, then inspect shrinkage, curl and visual change. This avoids approving a general-purpose roll where a more stable sheet or lower-haze grade is needed.
Item | Typical Range / Customizable Value |
Material | Clear PET / polyester film |
Product type | Standard clear, high clarity, ultra clear, adhesive-backed, laminated, converted |
Thickness | Grade-dependent range; specify by process and end use |
Supply format | Master roll, slit roll, cut sheet, adhesive-backed roll, adhesive-backed sheet, die-cut part |
Roll width | Standard width or slit-to-width for equipment |
Roll length | Specify by thickness, core size and outer diameter |
Core size | Match to unwind equipment and roll build |
Outer diameter | Match to handling method and production line |
Winding direction | Regular wound or reverse wound |
Transparency | Standard clear or low-haze grade |
Haze check | Verify by grade and agreed test method |
Flatness | Review for printing, lamination, overlays and die cutting |
Slit-width tolerance | Project-specific; agree by roll width and equipment |
Slit-edge quality | Inspect before production use |
Sheet size | Standard or cut-to-size |
Sheet squareness | Review for cutting and assembly |
Sheet-cut tolerance | Agree by dimensions and cutting method |
Adhesive option | With or without PSA |
Converted format | Slitting, rewinding, sheeting, lamination, die cutting |
Validation | Actual-process trial and retained approved sample |
Customization may cover thickness, clarity grade, roll width, roll length, core size, outer diameter, winding direction, sheet dimensions, slit-width tolerance and sheet-cut tolerance. The delivery format should also state whether material is required as master rolls, slit rolls, sheets or finished parts.
For converted components, drawings should show dimensions, hole positions, edge requirements and adhesive side. Before volume production, run the approved sample through the intended converting process, including lamination, sheet handling or die cutting. Keeping that sample with the specification supports batch consistency and smoother repeat-order communication.
Polyester film with adhesive should be treated as a layered material, not simply as a PET thickness. Specify the film grade, adhesive side, bonding surface, transparency requirement, liner structure and operating temperature. For die-cut parts, also check dimensions, hole positions, edge cleanliness and assembly direction. A trial run on the actual substrate should look for bonding quality, bubbles, edge lift, flatness and visual consistency.
Yes. Polyester film commonly refers to PET film. BOPET is biaxially oriented PET film with improved mechanical strength and dimensional stability.
Rolls suit continuous unwinding, printing and lamination. Sheets are practical for offline fabrication, insulation parts, inspection and die cutting.
Yes. Adhesive-backed PET is available as rolls, sheets or converted parts. Check the adhesive side, bonding surface and operating conditions before production.
Test an approved sample under the intended process conditions. Review haze, appearance, flatness and dimensional change after the agreed temperature and dwell time.
